This selection is basically a CORE upgrade performed on a radio that is either in very bad condition, or is missing parts, or both. It's a CORE upgrade plus replacement parts and/or a lot of extra work. Contact us if you think your radio may be in this category.
The 'CORE' upgrade is aimed at most sets from the 1930's to the 1970's. Your radio may have an internal speaker or not.
The upgrade involves a full cosmetic restoration of the radio and the installation of an AM/FM 4 x 45W RMS Stereo radio unit which replaces the original electronics. An AUX input is fitted too. All the original controls including the band switch are serviced and integrated. The resulting radio looks and operates exactly like it should as a period correct device, but has up-to-date features and performance. Turn it on and it sounds great!
Additional options may be selected for increased functionality:
Bluetooth Full, totally legal, hands free telephony, audio streaming and voice control
USB Charges phone, tablet or laptop AND plays MP3 files from a USB memory stick
DAB/DAB+ Receive DAB stations on your classic radio
All of these additional options are fully integrated into the radio, so the existing radio controls are used to handle phone calls or move between audio tracks etc.
Once we've agreed on what's possible with the radio it will be built to order according to your specifications.
Please allow 4 to 6 weeks from agreement and order for us to complete the work and get the radio back to you. We will keep you informed along the way.
-
Weight:4.2kg
Contact us so we can evaluate the radio you have ant the service you want.
Once we're fully aware of what is required, box up your radio very carefully and send it to us, including all the knobs, fascia and any other front panel parts. We will restore it, and install an AM/FM 4 x 45W RMS Stereo radio unit with AUX input.
You can go to our contact page to download and print off an address label, a packaging slip to pop in the box and a simple guide to packing your radio to make sure it gets to us safely.
Your car will have either a 6 Volt or a 12 Volt battery and it will be either Positive earth or Negative earth. We need to know the voltage and polarity of your car so we can build you a radio that will work in it.
Our standard build is for 12 Volt, Negative earth vehicles. If yours is NOT 12V Negative earth you will need to select the appropriate Voltage and Polarity from the drop down box and we will build a converter into your radio so it will work correctly in your car.
Check your battery, or ask an engineer if you're not sure. Polarity refers to which terminal of the battery, positive or negative, is connected to the car body, and hence is the earth or ground terminal.
The converted radio can be used with up to 4 speakers, each driven by one of the 4 separate channels. However, it will operate perfectly well with the number of speakers you feel is correct for your car. If you use a single speaker, the unit will automatically blend Left and Right Stereo channels into a Mono feed so there will be no compromise in sound quality. Each time the radio is turned on it checks to see if there's a speaker attached to each channel and any unused channels are automatically switched off. This means that speakers can be added or removed without having to re-configure the radio in any way.
We would always recommend that new speakers are fitted with your converted radio. Go to our Accessories section to select from the high quality speakers we have on offer there.
Our AM, FM and DAB radio upgrades have all been optimised to operate using the original period aerial on the vehicle. No additional aerial, other than the original, is required.
Please make sure the original aerial is functional and if telescopic, it's clean and operates smoothly. If you need to source an aerial, we have a number of options available depending on the age and type of car and whether you want hidden, in-cabin or a powered aerial. Check out our aerials in the 'Accessories' section here.
A comprehensive installation and operating guide is supplied with every radio. This guide will be tailored to your individual set and will include full instructions for the operation of the radio, including any installed options.
Installation is straightforward, but we always recommend that it is carried out by a qualified and experienced engineer. However, if there are any issues or questions raised during installation we are happy to help, so please do get in touch.
Your re-engineered and upgraded radio is covered by a comprehensive 1 year warranty from the date of service.
Please be aware that our warranty is offered on the understanding that the set has been correctly installed in accordance with the installation guide supplied and has not been tampered with in any way.
If you have any problems with the radio at all, please do get in touch and we will work with you to find a resolution. Many issues can be solved on the phone, but if we do need to have the radio returned, we will arrange a collection at our expense. All you have to do is package it securely and hand it to the courier. We will repair the set and get it back to you as quickly as we can.
Because we focus on attention to detail and quality in everything we do, we have rarely had a radio returned. Consequently, we feel confident in offering our customers this comprehensive 1 year warranty. We want you to have total confidence in us and peace of mind when you purchase and enjoy your classic car radio upgrade.
Aurora FMR-2.7 Specifications
FM Receiver:
Frequency Range: 87.5-108 MHz (Worldwide except Japan) 76.0-95.0 MHz (Japan)
Channel Spacing: 200kHz (America’s) 100kHz (all other regions)
AM Receiver:
Frequency Range: 530-1710 kHz (America’s) 531-1611 kHz (all other regions)
Channel Spacing: 10kHz (America’s) 9kHz (all other regions)
Audio Output:
Speaker Impedance:
2-45 Ohms
Output Power:
4 X 45W into 4 ohms @14.4V maximum (EIAJ)
2 X 75W into 2 ohms @14.4V maximum (EIAJ)
Fully short circuit protected
